The MC Glass is a semi-structural curtain wall system used to create a flat surface on the outside without any visible aluminum profiles. With no visible external aluminum elements, only the glass fillings are visible and are separated by structural silicone gaps. Special pockets and gutters are profiled in the glazing units, into which mounting plates are installed to fasten infills to the curtain wall. This system is characterized by very good thermal insulation parameters due to the innovative materials used. This system also allows for various versions of the external appearance, in particular the so-called horizontal or vertical line.
The visual width of the mullion-transom is 55 mm. A selection of mullions and transoms adapted for static requirements are available. Bending profiles and a wide range of decorative cover caps are also available and allow for a modern, individual look.
A variety of colors are available from the RAL palette as well as structural, Aliplast Wood Color Effect, anodized, and bi-color colors.
TECHNICAL SPECIFICATION
SYSTEM |
MATERIAL |
DEPTH MULLION |
DEPTH TRANSOM |
GLAZING RANGE |
MULLIONS RIGIDITY |
TRANSOM RIGIDITY |
MCG |
aluminium |
10-326 mm |
10-294 mm |
4-59 mm |
from 2,5-4092 cm4* |
from 0,9 to 1831,1* |
PERFORMANCE
SYSTEM |
THERMAL INSULATION UF** |
AIR PERMEABILITY |
WINDLOAD RESISTANCE |
WATERTIGHTNESS |
MCG |
Uf from 0,88 W/m2K |
Class AE1300; EN 12152 |
2000Pa - 3000Pa; EN13116 : 2004 |
Class RE1800; EN 12154 |
*There is a possibility to use additional reinforcements.
**Thermal insulation is dependent on a combination of profiles and thickness of the filling.